QR Code Coupons: How to Create Redeemable Offers

UsageBusiness & Marketing

Published

Share
Illustration for QR Code Coupons: How to Create Redeemable Offers

Overview

A QR code coupon connects a scan to a discount offer. But opening an offer and redeeming it are different actions. For example, Shopify documents a discount QR workflow that can open an online store for customers or be scanned by staff in Shopify POS. That behavior comes from the platform’s discount integration—not simply from the QR image. [1]

Start with the redemption method, then build the code around it. The guide below separates planning recommendations from documented platform capabilities.

Choose who scans the code—and what happens next

Use one of these three structures when planning your campaign:

Structure Who scans? What to arrange before launch
Offer-page QR Customer A page explaining the offer, with a visible promo code or redemption instructions
Discount-link QR Customer A platform-supported link that carries the discount into the shopping flow
Checkout redemption code Staff or checkout scanner A coupon identifier and format the checkout system explicitly supports

Do not assume any QR code can be scanned at any register. GS1 describes multiple coupon identification approaches, including global and geographic schemes and a US coupon identification scheme. Its guidance is not a promise that an arbitrary QR URL will be accepted by a retailer. For a manufacturer coupon intended for use across retailers, confirm requirements with the participating retailers and your coupon-processing provider before creating artwork. [2]

How to create a QR code coupon

1. Define the offer and its limits

Write a short offer specification before making the code. Include:

  • Discount amount or percentage, including any maximum savings.
  • Eligible products, services, customers, and locations.
  • Minimum qualifying purchase and how it is calculated.
  • Start and end date, time, and time zone.
  • Whether other discounts can be combined.
  • Total-use, per-customer, or per-coupon limits.
  • Whether redemption happens online, in store, or both.

Use a concrete headline such as “$5 off a qualifying purchase of $25 or more” rather than “Exclusive savings.” For merchants using Google Merchant Center promotions, Google specifically requires titles to identify the promotion’s value and applicable minimum purchase or new-customer conditions. Those are Google program requirements, not universal coupon-format rules. [3]

2. Configure redemption before generating the QR

Create the discount in your commerce platform, POS, or coupon system first. Then obtain the supported discount link or redemption identifier.

Shopify example: Shopify supports shareable discount links and QR codes for active discounts. A customer can scan to shop online, with the discount applied when eligible products are added; staff can scan the supported code in Shopify POS. Shopify also says discounts created by third-party apps cannot receive these links or QR codes through its admin. Check the app’s own documentation instead. Check whether the order shows the discount before completing a test purchase. [1]

If you choose manual cashier redemption, write down exactly how staff should recognize eligibility and enter the discount. Treat that as an operating procedure, not an automated QR validation system.

3. Build a focused offer page

For an offer-page workflow, put the following near the top:

  1. The benefit: What the shopper receives.
  2. The conditions: The most important eligibility and purchase requirements.
  3. The next action: Shop eligible products, copy a code, or show the coupon to staff.
  4. The deadline: An unambiguous expiration date and time zone.

Recommended copy for a hypothetical offer:

Get $5 off a qualifying purchase of $25 or more. Online only. Enter WELCOME5 at checkout. Minimum applies to eligible merchandise before tax and shipping. One use per customer; cannot be combined with other offers. Ends December 31, 2026, at 11:59 p.m. Eastern Time.

Use that wording only if it matches your configured rules. Provide a clearly labeled button to eligible products rather than making visitors search for the offer again.

At checkout, verify that shoppers can see the actual discount—not just the promotional promise. For Merchant Center promotions, Google requires confirmation of the promotion in the cart or at checkout. [4]

4. Set usage controls in the redemption system

Do not treat a QR image as a one-use control. Instead, configure the limits supported by your discount system. Shopify, for example, documents separate settings for a discount’s total number of uses and one use per customer. [5]

Decide which rule you actually need:

  • Campaign-wide limit: Stop after a specified number of accepted uses.
  • Per-customer limit: Restrict use according to the platform’s customer identification rules.
  • Unique coupon: Issue a distinct identifier for each recipient and require validation before acceptance.

These are implementation requirements to confirm with your provider, not capabilities to assume. If unique, single-use redemption is essential, require a demonstrated workflow for accepting a valid coupon and rejecting its reuse.

5. Generate the code for the supported destination

For a URL-based coupon, encode the final offer URL or the platform-issued discount link. For checkout scanning, use the code format your redemption system specifies.

Keep text, borders, and artwork out of the QR code’s quiet zone. DENSO WAVE specifies a clear margin four modules wide on every side; a module is one small square in the QR pattern. Do not turn its illustrative size calculation into a universal minimum print size. [6]

Recommended supporting text:

  • Customer scan: “Scan to get $5 off—terms apply.”
  • Staff redemption: “Show this coupon at checkout.”

Also provide a readable fallback URL or promo code where your workflow permits it. For digital placements, include a clickable link alongside the QR.

Measure visits separately from redemptions

For an instrumented offer page, Google Analytics supports campaign parameters such as utm_source, utm_medium, and utm_campaign; utm_content can distinguish creative versions or placements. These parameters identify referred traffic. They do not themselves validate a coupon. [7]

Recommended reporting plan:

  • Use consistent campaign tags for each placement.
  • Record successful coupon uses in the checkout or POS system.
  • Compare referred visits, accepted redemptions, and discounted order value.
  • Label each metric precisely: do not rename landing-page visits “unique scans” or treat them as completed purchases.

Test the entire redemption path before launch

Use this acceptance checklist; it is not a record of tests performed for this article:

  • [ ] Scan the final artwork at its intended printed size and placement.
  • [ ] Check the destination in the mobile browsers your customers use, including relevant in-app browsers.
  • [ ] Confirm the offer, terms, and next action are readable without searching.
  • [ ] Redeem with an eligible basket and confirm the discount amount.
  • [ ] Try an ineligible item and a basket below the minimum.
  • [ ] Check expiration, discount combinations, and repeat-use behavior.
  • [ ] For store redemption, have staff complete the actual POS workflow.
  • [ ] Confirm the fallback instructions and campaign reporting.
  • [ ] Arrange an expired-offer page rather than leaving visitors without an explanation.

Bottom line: Design the redemption first. Then use the QR code to deliver the right page, discount link, or supported checkout identifier. Approve the campaign only after the customer-facing terms and actual checkout behavior agree.

References

[1] Shopify Help Center — Managing and editing your discounts — https://help.shopify.com/en/manual/discounts/managing-discounts

[2] GS1 GO — How are barcodes used on coupons (money off vouchers)? — https://support.gs1.org/support/solutions/articles/43000734149-how-are-barcodes-used-on-coupons-money-off-vouchers-

[3] Google Merchant Center — Editorial requirements — https://support.google.com/merchants/answer/2877578?hl=en

[4] Google Merchant Center — Promotions policies — https://support.google.com/merchants/answer/2877565?hl=en

[5] Shopify Help Center — Discount codes FAQ — https://help.shopify.com/en/manual/discounts/discounts-faq

[6] DENSO WAVE — Point for determining the code area — https://www.qrcode.com/en/howto/code.html

[7] Google Analytics — URL builders: Collect campaign data with custom URLs — https://support.google.com/analytics/answer/10917952?hl=en

Ready to create your QR code?

Create QR Code